GENERAL MANAGER PROF. DR. HOSSAM TALAAT
- Prof. Hossam Eldin A. Talaat is currently a professor at the Electrical Power Engineering Department, Faculty of Engineering, Ain Shams University, Cairo, Egypt.
- He was the Head of the Department, Jan. 2012 – July 2014.
- He was the Director of the Continuing Engineering Education center, Faculty of Engineering, Ain Shams University, Oct. 2009 – Sep. 2011.
- He was a Member of the Electrical Technical Committee, Saudi Building Code, July 2003- March 2006.
- He has authored and co-authored more than 70 technical papers and reports.
- He has accomplished several research projects as Principal Investigator and as investigator.
- He is the Chairman of 2 IEC Egypt committees (49& 93), 1999-present.
- He was a member of the Egyptian National board of Electricity and Energy Researches– Scientific
- Research and Technology Academy, 1999-2001.
- He is a reviewer of many international journals (IEEE, IET, Electric Power System Research,
- Electrical power and Energy systems).
- He has carried out the following Research Projects:
– “Designing and Manufacturing of a prototype of a Multi-Function Digital Relay, the functions include: over current (inverse and definite), thermal overload, unbalanced, fault recording”, R&D project for EGEMAC (1999-2000).
– “Downed Conductors Detection”, project No.1 of Saudi Aramco Chair in Electrical Power, Budget SR300, 000 (2010-2012).
– “Impact of Distributed Generation on Reliability and Power Quality of Distribution Systems”, project No.4 of Saudi Aramco Chair in Electrical Power, Budget SR150,000 (2010-2012).
– “Evaluation of Power Quality in SEC Transmission System”, Research project of the Saudi Electricity Company # S30801, (2009- 2010).
PROJECTS MANAGEMENT SECTION HEAD
- Has considerable experience in the field of Substation Design Engineering.
- His broad experience also extends to include consultancy and Engineering for High Voltage substations, Medium Voltage .
- He worked as a Senior Secondary design Engineer in an various Company.
- He also Worked as Electrical design Engineer (Electrical design Department) in EGEMAC “EgyptianGerman Electrical Manufacturing Co. in Preparing technical offer for high and medium voltage tenders, Design of circuit diagram & Making purchase offers and approve performs technically.
- His experience is not limited to but includes the following:
– Design of circuit diagram.
– Making purchase offers and approve performs technically.
– Making the front view of the panels.
– Design of Bus Bar Protection System.
ELECTRICAL “SECONDARY” SECTION HEAD
- Has considerable experience in the field of H.V and Extra H.V substations Protection &Testing.
- He Worked as Senior Protection & Testing Engineer in AT&C (Al-Fanar Testing & Commissioning) Is A Department In Al-FANAR Co. Which Operates On Electrical Substations and Handles the Pre- Commissioning, Commissioning, Testing and Start-Up Substations.
- He also worked as Electrical Protection Design Engineer in EGEMAC “Egyptian German Electrical Manufacturing Co. in Design & Implementation of High voltage substations, Mobile substations (220 & 66 KV), MV switchboards, kiosks (22, 11& 6.3KV) & Low voltage panels, MCC (380 & 220 V).
- He is Preparing Schematic Diagrams, Solving Problems In Manufacturing and Erection Stages Till Handing Over, and Preparing Circuit Diagrams, Terminals List & Equipment List for Company Products
- He is a Specialist in Substation protection system design.
- His experience covers working in Egypt, KSA and Gulf states.
ELECTRICAL “PRIMARY” SECTION HEAD
- Has a strong academic background in the field of Electrical Engineering.
- He also has vast experience as a consultant and designer.
- He has considerable experience of more than 7 years in the field of Electrical Power Engineering.
- He has experience in dealing with high voltage, Extra high voltage substations, low voltage electrical systems for wastewater pumping station, wastewater treatment plant & other buildings as residential, industrial and commercial buildings.
- His experience is not limited to but includes the following:
– Preparing complete primary Base & detail Design for H.V & E.H.V (Transmission Substation) and Distribution substation. (In case of Contractor consultant).
– Preparing complete conceptual Design primary & secondary, Project Technical specification (PTS) and tender document for H.V & E.H.V (Transmission Substation) and Distribution substation. (In case of Owner consultant).
- His experience covers working in Egypt, KSA and Gulf states.
ELECTRICAL “SECONDARY” SENIOR ENGINEER
- Has considerable experience of more than 7 years in the field of Electrical Power Engineering.
- He has experience in dealing with high voltage substations.
- He is a Specialist in Substation protection system design.
- His experience is not limited to but includes the following:
– Preparing complete Base/Detail design for secondary& protection scope
– Preparing operational Single Line Diagram.
– SLD with relaying and metering. & Protection logic diagram.
– CT/VT Sizing calculation.
– SLD with CT/VT data.
– TFR & SCADA point list.
– Cable termination Schedule.
– Relay setting.
- His experience covers working in Egypt, KSA and Gulf Countries.
CIVIL, ARCH & STRUCTURAL SECTION HEAD
- Has considerable experience in the field of Civil& structural Engineering.
- He has a strong academic background in addition to that his professional experience as a
- Consultant and Designer. as he worked in international consultancy firms.
- His experience is not limited to but analysis, design of each element of the (RC) buildings,
- Coordinate with other department (Electrical, mechanical, vendor & pre-cast) to achieve the civil
- drawings with the best quality & avoid any confliction between different items in the building.
- Professionally, he is an Civil& Structure designer and reviewer for Indoor and outdoor substations as:
– 380kV GIS building.
– Control building.
– 33/13.8 kV switchgear building.
– Cable tunnels.
– Power transformer with catch basin & firewall.
– Auxiliary transformer with catch basin.
– Boundary walls foundation.
– GIB foundations.
– Capacitor bank foundation.
– Pump house room & water tank.
– Duct bank & manholes.
– Septic tank & soak pit.
– Lighting pool foundation.
MECHANICAL SECTION HEAD
- He is a well-recognized as a consultant and designer.
- Professionally, he is an mechanical designer and reviewer for HVAC, Heat transfer, plumbing, firefighting, compressed air, air conditioning and refrigeration systems. He has worked in national and international projects in the above mentioned fields.
- He has also participated in projects as mechanical designer and reviewer. Among these projects are:
– Substations, hotels, hospitals, malls, pharmaceutical factories, and industrial ventilation.
- His scope of work is not limited to but Design / Design review of HVAC, Plumping & Fire fighting system for H.V substations up to 380 KV, Assign the work in the unit to the unit members, Schedule all the activities in the unit, Monitor projects milestones and ensure delivery of services on time as scheduled, Oversee the design work ensuring highest standard, Evaluate, monitor and improve the productivities of personnel by introducing new approaches to the design process, Implement and maintain a coordinated and consistent filing system for his unit’s work.